14000 W. 215th St., Bucyrus, KS 66013-9519 Ph. 913-879-2587 - 7:30 A. M. - 3 P. M CST Monday-Friday
Call to place an order. Minimum order $10.00 |
PJ32 |
Plastic qt. jar will fit plastic mason jar feeders & qt. water bases |
$2.50 6/$14.00 |
PJ58 |
58 oz. jar will fit plastic mason jar feeders & qt. water bases. Does not work well with galvanized water base or feeders. |
$4.00 6/$23.00 |
517 |
Regular lip galvanized base for mason jar. |
$1.50 6/$8.40 |
740 |
Regular lip plastic base for mason jar; comes in red, apple lime, & purple |
$1.75 6/$9.50 |
4460 |
Drown proof screw on plastic base for mason jar |
$3.00 6/$16.00 |
DT9870 |
Double-Tuf 1 ½ -quart waterer is like DT9872, but smaller. It is 7.25” w x 7.25” h without legs and 8.75” h with legs. Use without legs for starting chicks. As they grow, add legs to keep feed & debris out of the water. |
$6.00 5/$28.75 |
DT9872 |
Double-Tuf 3-quart waterer with legs 9.5” w x 9.5” h without legs, 11” h with legs. Use with legs detached for starting chicks. As they grow, add legs to keep feed & debris out of the water. |
$8.50 5/$41.00 |
DT9859 |
5-quart plastic water fount with handle is 10.75” l x 10.75” w x 11.75” h. Translucent top makes it easy to check the water level. Available in late Sept. |
$8.00 5/$37.50
|
PD117 |
Is 4 ⅝” h. Base is 4 ¾” in diameter. It holds 1 ¾ pints. The top of the easy-to-clean plastic drinker snaps to the base. Drinker can be used in brooders & pens because of its height. |
$4.00 3/ $11.55 6/$22.50
|
PD116 |
Is 6 ⅛” h. Base is 5 ⅞” in diameter. It holds 2 ½ pints. The top of the easy-to-clean plastic drinker snaps to the base. Drinker can be used in brooders & pens because of its height. |
$4.50 3/$12.75 6/$24.00
|
AW8 |
8 oz. water bottle has wire mounting bracket & stainless steel tube. Limited stock suitable for use with small mammals. |
$2.25 6/$12.00 |
AW32 |
32 oz. wide-mouth water bottle has wire mounting bracket & stainless steel tube. |
$6.00 6/$34.00 |
92PK |
Package of 3 Lamb/Small Animal Nipples. Pure all gum nipples fit on the top of a soda bottle |
$2.00 |
167451 |
Built in hooks allow this galvanized waterer to be hung off the ground to reduce spilling and soiling of the water. Gravity-fill design is easy to fill and clean. Holds 1 pint. Size: 5.75” l x 4.35” w x 5.75” h. |
$8.50 6/$49.50 |
7906 |
Miller 3 gallon plastic poultry waterer is 16” in height. Has a metal handle and 4 “legs” on the top of the fount to steady it while it is being filled. Twist lock type base is 12” in diameter and 1 3/4” deep. When first used, it is hard to twist the base onto the fount. For sale ONLY at swaps, shows, etc. |
$17.00 3/ $48.00
|
PPF3 |
Little Giant Top-fill automatic water fount hold 3 gallons.The vaccum-sealing design creates an automatic water flow. Jar snaps onto base. |
$35.00 |
167611 |
Miller 1 gallon galvanized bucket waterer with rolled edges safety. For adult birds. Unique design - bucket with built in handle for easy transport converts to a gravity-fill waterer. Front leg stabilizes so birds can drink. Size: 9.975” l x 7.5” w x 9.5” h. |
$15.00 2/$28.00 |
GF2 |
Miller 2-gallon double-walled galvanized fount has a brass valve with a rubber sealing washer for shut off. Outside body has a top handle & a visible locking devise. Inside handle is above the waterline. It is 10 3/4” h. |
$25.00 |
GF5 |
Miller 5-gallon galvanized fount has the same specifications as GF2 *37 lbs. DW It is 15 1/4” in height. (only 2 left) |
$37.00 |
HPW33 |
Patented design of this heated poultry fount keeps water ice-free down to -5 degrees F in the winter, but can be used year round as well. Thermostatically controlled with optimized heater pad design for maximum heating efficiency to ensure ice-free water. Rounded top of water jug helps prevent chickens from roosting. The easy-to-fill design makes caring for your chickens simple. 3-gallon capacity. 4-foot cord is LOCKNDRY compatible. cULus Listed. 100 Watts, 120 Volts, 60 Hz. One year warranty.
|
$46.00
|
HB125 |
125 watt electric fount heater (bottom left picture) is designed to use with galvanized founts in a dry, sheltered areas. Cord should be protected from animals and used with a ground fault protected outlet. Has enclosed internal thermostat; does not draw electricity until temperature drops below freezing. 16½” x 16½” x 3.687” H. Uses less than 1 amp per hour. Limited stock!! |
$46.00
|
PBS12 |
12 plastic pop bottle founts with metal springs (Dansani or Coke bottles work best). Fount projects 2” into cage. |
12/$16.00 2 founts/$4.00
|
PBD12 |
12 plastic screw-on pop bottle founts are available only in white. Founts are 2 ¾” l x ½” w x ½” d. 7 ¾” long straps attach to cage wire. |
12/$16.00 2 founts/$4.00 |
SP12 |
Springs can be used for attaching smaller bottles. 12 springs per package |
$10.00
|
7506 |
Miller gallon jar & base. Base is also available in yellow, purple, or apple green |
$5.50 6/$31.00 |
7506J |
Miller gallon jar (not interchangeable with Kuhl jars) |
$3.00 6/$16.00 |
7606B |
Miller poultry base - chose red, yellow, purple, or green |
$3.00 6/$16.00 |
TL499 |
Kuhl Twist Lock base and 1 gallon jar complete (not for use with chicks as the base is not a narrow, drown-proof base) |
$6.00 6/$33.00 |
49QC |
Kuhl plastic gallon fount & quail base. |
$11.75
|
Waterer Bases and Founts Drop-Shipped from Brower
Call for a shipping quote. |
||
1GFQ |
The Brower poly 1 gallon fount is 8 ¾” tall. The drown proof twist-lock base is 11” in diameter & 1⅜” deep with a narrow drinking area is suitable for baby chicks as well as quail. Founts stack for storing and shipping. |
6/$50.00 |
PB35 |
Use the Brower heavy-duty poly bucket base to make an inexpensive fount to water large groups of birds. Fill a 3 or 5-gallon plastic bucket with water, place the heavy-duty plastic base over the bucket, & tip the bucket into the upright position. Easy to clean. |
3/$45.00 |
GF4 |
Brower top-fill poly fount has a 4 ½” opening for ease in filling or cleaning. Shut off cap can be closed while the tank is filled. After filling, open the shut off. GF4 is 16 ½” h; removable base is 2 ⅜” d & 16 ½” diameter Capacity: 150 chicks or 75 pullets.
|
$40.00 |
Parts for Brower top-fill GF4 and GF7 are limited to those in stock in our warehouse. |
||
7GF11 |
GF4 or GF7 replacement poly base |
$13.00 |
7GF12 |
GF4 or GF7 replacement screw-on lid |
$9.00 |
7GF14 |
GF4 GF7 replacement black shut-off valve |
$2.50 |
7GF15 |
GF4 or GF7 replacement cup insert |
$3.50 |
7GF16 |
GF4 or GF7 replacement top flat gasket |
$3.75 |
OP263 |
GF4 or GF7 replacement bottom o ring |
$1.25
|